Uniform convection heating for sublimation process

Faced with the challenge of transitioning a product from low to high-quantity production, one client selected EIT for thermal management experience. The client had Associate in Nursing ink-sublimation method for printing graphics on their product that used infrared lamps. The IR sublimating was a slow, one-up method and didn't lend itself well to high-quantity production. They required Associate in Nursing sanctification technology to show their method around. The client was fascinated by convective heating for his or her sublimating method, however desired a additional pakaian seragam temperature profile across the substrate than a typical heat gun might provide. EIT took on the task of customizing a nozzle attachment for the TIP1K thermal method management unit to realize a regular and controlled thermal profile across the 2” × 6” substrate. A thermally insulation PTFE nozzle attachment was designed and machined to embrace the 2” × 6” substrate. Mechanical experts performed analysis to verify that obstructing the air flow and forcing it to combine by method of a heuristically determined hole-pattern in conjunction with a preliminary diffuser would decrease the gradient across the substrate. The seragam kantor is very important for office. The final style reduced the gradient from 150°F right down to 40°F, guaranteeing that the TIP1K would suit the applying. By commutation the IR system with the bespoke TIP1K, the time-limiting issue was off from the customer’s method permitting them to form the required transition to a high-quantity production method.

টিউনারঃ mywebblogonline

আপনার জন্য আরও ভয়েস

Ads by Tech Voice